KDX-C

Krix KDX-C Centre Channel Speaker The KDX (Krix Digital Experience) Loudspeaker System, comprising the KDX-M (main/rear) and the KDX-C (centre), is designed primarily for 5 channel digital sound reproduction.

With digital sound setting new standards in movie entertainment, musicality often becomes a low priority. At Krix Loudspeakers audio quality is paramount, which is why Krix developed the KDX-M loudspeakers, a compact bookshelf design forming the basis of a high quality stereo system.

Our major focus was to provide precise timbral matching to the left, centre, right and rear channel. We achieved this by using identical cabinets, bass drivers and tweeters for each loudspeaker.

The only difference is found in the design of the crossover network for the centre channel. This was necessary because the centre channel is horizontally aligned and usually placed on the top of a television or in a cabinet. This creates additional low frequency for which the crossover compensates. All drivers in the KDX-M and KDX-C are magnetically shielded so they can be placed in close proximity to your television.

Krix have matched the KDX-M to be sold as pairs and the KDX-C to be sold as a single unit.


Specifications


Frequency Range: 50Hz - 20kHz in room response
Power Handling: Maximum 110 watts RMS amplifier power
Sensitivity: 89dB for 2.83 volts at 1 metre
Configuration: Point source dual 5 inch 2-way
Bass Drivers: • Fibre reinforced moulded polymer baskets with 2 x nominal 5" (130mm) doped paper cones
• 1" (25mm) voice coil wound on high powered aluminium former. Double magnet shielded.
Tweeter: • 1" (26mm) fabric dome
• Ferro fluid cooled
Crossover Point: 2.6kHz - The major focus of the KDX-M/KDX-C system was to provide precise timbral matching to all 5 channels, by using identical cabinets, bass drivers & tweeters for each speaker. The only difference is found in the crossover network for the KDX-C, because the centre channel is horizontally aligned & placed on top of a television or in a cabinet. This creates additional low frequency for which the crossover compensates.
Impedance: Nominally 6 ohms
Enclosure Type: Bass reflex, rear vented
Dimensions (HxWxD): 185mm x 435mm x 265mm
Material: 17mm MDF
Finish: Lacquered timber veneer
Volume: 14 litres internal
Weight: 9kg