Krix KX4010 Cinema Stage Subwoofer

KX4010

Cinema stage subwoofer loudspeaker featuring a single 18" bass driver enclosure with large vent areas, which are vital for efficient low frequency radiation at high power, and are a feature of Krix subwoofers. Vertical back bracing is locked and rebated into the top and bottom panels with front to back brace for added cabinet rigidity.

The KX-4010 is a high performance, single 18" subwoofer. It has been designed to give maximum SPL down to 28Hz and in such a way to reduce cone excursion in the pass band (above 27Hz).

Large peak to peak linear cone excursion and large vent areas, together with the correct enclosure volume and tuning, have all been optimised to give large linear power response at all frequencies. That is, little compression occurs at high levels at very low frequencies.

A slim version of this speaker, KX-4010.S, (380mm), is available with the vents located on the side.

Features
  • Linear power response
  • 15mm peak to peak linear cone excursion
  • High efficiency
  • Large vent areas
  • Enclosure depth (450mm) same as KX-2610 screen low frequency

Specifications


Dimensions (HxWxD): 42" (1065mm) x 26" (660mm) x 18" (450mm)
Driver: 1 x 18" bass driver - model KX-8800
Nominal Impedance: 8 ohms
-3dB point: 28Hz
Tuning Frequency: 30Hz
Power Capacity: 400 watts RMS
Maximum Program Power: 800 watts
DC Resistance: 5.0 ohms
Axial Sensitivity: 98dB for 2.83 volts @ 1 metre
Weight: 132 lbs (60 kg)
Net Internal Volume: 8 cubic ft (225 litres)
Enclosure Material: .7" (18mm) MDF
Loading: Bass reflex
Bracing: 1.8" (45mm) x 1.8" (45mm) timber in all corners, across the mid panel section & front to back
Input Terminals: 200 amp proprietory terminal posts which will accept up to .2" (6mm) cable
Finish: Utility cinema black